Bosch GBH 5-40 DCE Professional SDS-max Combi Hammer 1150W 110V

Bosch GBH 5-40 DCE Professional SDS-max Combi Hammer 1150W 110V

The Bosch GBH 5-40 DCE Professional is a powerful SDS-max combi hammer built for heavy drilling and chiselling in concrete and masonry. A 1150W motor delivers 8.8 joules of impact energy, so it drills holes up to 40mm with hammer bits and core cuts up to 90mm. That makes it a reliable workhorse for groundworkers, electricians, plumbers and general builders. This 110V version is made for construction sites where 110V tools are required.

Bosch Vibration Control reduces the vibration reaching your hands, so long drilling and chiselling sessions are more comfortable and less tiring. Constant Electronic keeps the speed steady under load for consistent performance. The patented setting wheel lets you match the speed and impact rate to the material, from soft brick to hard reinforced concrete.

For chiselling, the lockable switch lets you work continuously without holding the trigger. A service display shows when the tool needs maintenance, and a ball grommet gives the cable a wide movement radius to help prevent damage. It is supplied in a carry case with an auxiliary handle, grease tube and cloth. Browse our full range of Bosch power tools at Tool Source.

Key Features

• Powerful 1150W motor with 8.8J impact energy
• SDS-max tool holder for heavy drilling and chiselling
• Drills 12–40mm with hammer bits and core cuts 40–90mm
• Vibration Control for more comfortable, low-fatigue work
• Constant Electronic keeps the speed steady under load
• Setting wheel to adjust speed and impact rate to the material
• Lockable switch for continuous chiselling
• Service display and standby display
• Ball grommet for a wide cable movement radius and to help prevent cable breaks
• 110V site version

Specifications

• Brand: Bosch Professional
• Model: GBH 5-40 DCE
• Part number: 0611264060
• Voltage: 110V
• Power input: 1150W
• Impact energy: 8.8J
• Impact rate: 1,500–3,050 bpm
• Rated speed: 170–340 rpm
• Tool holder: SDS-max
• Drilling in concrete, hammer bits: 12–40mm (optimum 18–32mm)
• Drilling in concrete, breakthrough bits: 45–55mm
• Drilling in concrete, core cutters: 40–90mm
• Weight: 6.8kg
• Vibration (drilling / chiselling): 10.5 m/s² / 7.5 m/s²

What's in the Box

• 1 x Bosch GBH 5-40 DCE Professional (110V)
• 1 x Auxiliary handle
• 1 x Grease tube
• 1 x Machine cloth
• 1 x Carry case

Pair it with SDS-max drill bits, chisels and core cutters from our power tool accessories range at Tool Source.

Frequently Asked Questions

What is the Bosch GBH 5-40 DCE used for?
It is used for heavy drilling, core cutting and chiselling in concrete and masonry, including anchor holes, service penetrations, chasing and light demolition.

What size holes can it drill?
It drills 12–40mm in concrete with SDS-max hammer bits (best between 18mm and 32mm), 45–55mm with breakthrough bits and 40–90mm with core cutters.

Do I need a transformer for the 110V version?
Yes. This model runs on 110V, so it needs a 110V site transformer or a 110V site supply. It will not plug into a standard 230V household socket. Contact us if you need the 230V version.

Can it be used for chiselling only?
Yes. It has a chisel-only mode, and the lockable switch lets you chisel continuously without holding the trigger.

Where can I buy the Bosch GBH 5-40 DCE in Ireland?
The Bosch GBH 5-40 DCE is available at Tool Source with next day delivery across Ireland or click and collect from our store in Castlemaine, Co. Kerry. If you have any questions, contact us before ordering.

Warranty: This product is covered by the standard manufacturer's warranty. See our Warranty Information page for full details.

Tool Source is an independent retailer, not affiliated with or endorsed by Robert Bosch GmbH. All products are 100% genuine and sourced through authorised distribution channels. Bosch® is a trademark of Robert Bosch GmbH.